2

For a National Board Exam Review:

Calculate the Reynold's Number, $Re$ for water at 20 °C flowing in an open channel. The water flowing at a volumetric rate of 200 gal/sec. The channel has a height of 4 ft and a width of 8 ft. At this temperature, water has a kinetic viscosity of 1.104*10^-5 ft^2/s

The given answer is 600,000. I have tried to solve the problem like this:

$${ D_{eq} = \frac{2*4*8}{4+8} = \frac{16}{3} }$$

$${ V = \frac{Q}{A} = \frac{200 \frac{gal}{sec} * \frac{1ft^3}{7.48gal}}{4.8 ft} = 5.570409982 \frac{ft}{s}}$$

$${ Re = \frac{VD}{\mu_k} = \frac{ 5.570409982 \frac{ft}{s} \times \frac{16}{3} ft }{ 1.104\times 10^-5 \frac{ft^2}{sec} } = 2691019.315 }$$

Am I using the wrong equivalent diameter? Why am I not getting the correct answer?

Air
  • 3,211
  • 4
  • 26
  • 47
james
  • 607
  • 5
  • 20
  • 28

2 Answers2

4

As Dan pointed out you got an error in your calculation.

First you start by calculating the hydraulic diameter, which is defined as

$$d_h = \frac{4 \cdot A}{U}$$

$A$ = cross sectional area of your duct

$U$ = wetted perimeter of the duct

This applies to any shape.

$$d_h = \frac{4 \cdot 8 \cdot 4}{8 + 4 + 4 } = 8 \: \mathrm{ft}$$

Your definition of the Reynolds number is correct

$$Re = \frac{v\cdot L}{\nu}$$

$L$ = characteristic length, in the case of a duct it's the hydraulic diameter $d_h$

$v$ = velocity

$\nu$ = kinematic viscosity

$$v = \frac{\dot{V}}{A} = \frac{200 \: \mathrm{\frac{gal}{s}} }{32 \: \mathrm{ft^2}} = \frac{26.74 \: \mathrm{\frac{ft^3}{s}}}{32 \: \mathrm{ft^2}} = 0.8355 \: \mathrm{\frac{ft}{s}} $$

Inserting yields

$$Re = \frac{0.8355 \:\mathrm{\frac{ft}{s}}\cdot 8 \: \mathrm{ft}}{1.104 \cdot 10^{-5} \: \mathrm{\frac{ft^2}{s}}} \cong 600 000$$

Please note that the Reynoldsnumber is dimensionless, in your final calculation this might be true, but take a closer look at your second line, the units do not equal $\mathrm{\frac{ft}{s}}$.

idkfa
  • 1,734
  • 1
  • 11
  • 19
0

Reynold Number can be calculated using Re=VD/Vk Since the Volumetric flow rate is given Q=200 gal/sec and the area (4x8)ft² we can get the Velocity V Q=AV

Convert 200 gal/sec to ft³/sec 200 gal/sec x 1 ft³/7.48 gal= 23.74 ft³/s

Q=AV 26.74=(4x8)(V) V=0.8356 ft/sec.

Sing the channel is a rectangle Diameter can be replace by Dh Dh=4R where R=Area/wetted Perimeter therefore Dh=4(A/P)

Calculating for Reynold number

Re=0.8356x4(4x8/2(4+8))/1.104x10^-5 Re=403671.4976

The answer should be 600,000 but it the most nearest answer.

Vincent Jhon P. Estorque
  • 1