4

Consider the system with unitary negative feedback such that the open loop transfer function is $$G(s) = \frac{as + 1}{s^2}$$

a) Determine the value of $a$ such that the phase margin is 45º

b) Determine the stationary state error for the unitary ramp input

c) For $a > 0$, what is the gain margin

My attempt: My doubt is about the item (c). That what I've made:

$GM = \frac{1}{|G(j\omega)|}$ for $\omega$ such that $\text{phase}(G(j\omega)) = -180º$. In this case $$\text{phase}(G(j\omega)) = -180º \iff \text{arctan}(a \omega) - 180º = -180º \iff \text{arctan}(a \omega) = 0 \iff \omega = 0$$

But for $\omega \to 0$, $|G(j\omega)| \to \infty \Rightarrow GM \rightarrow 0$

Is that correct?

Thanks!

Giiovanna
  • 201
  • 1
  • 2

1 Answers1

1

a)

The two poles at the origin contribute to a phase of -180${}^{\circ}$.

The zero at $-\frac{1}{a}$ contributes a phase ranging from 0 to 90${}^{\circ}$, with a phase 45${}^{\circ}$ at the corner frequency $\frac{1}{a}$.

Thus at the corner frequency the phase is -135${}^{\circ}$. The phase margin can be 45${}^{\circ}$ if at this frequency the magnitude is 1.

$$\left|\frac{\frac{i a}{a}+1}{\left(\frac{i}{a}\right)^2}\right| = 1$$

$$\sqrt{2} a^2=1$$

$$a=\frac{1}{\sqrt[4]{2}}$$

b)

The steady-state error for a ramp input is zero because it is a type 2 system.

c)

The gain margin is infinite. This is because the Bode phase plot is always above -180${}^{\circ}$ for $a>0$.

Suba Thomas
  • 2,036
  • 11
  • 15