For a electrical switching device which opens and closes frequently and forcefully. Would a combination of a soft polymer matrix and a conductive metal fibre be a good choice for this? While polymer in itself is not known for having good wear resistance, since it is opened and closed forcefully, using an elastomer could take the energy from the forceful closing and just deform very shortly. The metal matrix inside is protected and could be the charge carrier. Are my assumptions correct? What other ways are there to achieve what I mentioned?
Asked
Active
Viewed 216 times
1 Answers
2
One problem is that you may not have good contact between adjacent metal fibres. In general resin/fibre composites aim to completely coat the fibres so it is entirely possible that a metal/plastic composite could have very low conductivity, depending on how the fibres are orientated. Equally fine metal fibres will have a layer of oxidation on the surface which will further decrease conductivity.
I can't really see any reason why a metal composite would be better than solid metal for this sort of application.
If you want the spring/damping characteristics of an elastomer it would probably be better and simpler to mount a brass contactor on a polymer leaf spring.
Mechanical (as opposed to semiconductor) electrical contacts are most commonly made from brass as it has a good balance of conductivity, mechanical properties (reasonable hardness, toughness, ductility and strength) and corrosion resistance.
Chris Johns
- 15,326
- 3
- 24
- 42