Questions tagged [specifications]
25 questions
6
votes
2 answers
Tube Steel - ASTM A1085 vs. A500
Recently, tube steel manufacturers in the US have begun using the new ASTM A1085 specification for forming tube steel (a.k.a. hollow structural section or HSS) shapes, as opposed to the existing A500 specification.
From what I've read (here and…
grfrazee
- 3,597
- 1
- 18
- 33
4
votes
2 answers
Inert gas use during HVAC line installation
When brazing HVAC linesets, the correct method is to flow an inert gas through the line in order to prevent interior oxidation of the copper and brazing products. However, as a specifier, I can say that this needs to be done until I'm blue in the…
Secundus
- 571
- 1
- 4
- 20
3
votes
1 answer
Industry standard for AC wall electrical box space
Are there any industry standards (Engineering Specifications) for the minimum / maximum space required for the electrical box that holds a regular AC wall plug?
The problem I am trying to solve is quite simple - are / is there any local (USA,…
KingsInnerSoul
- 213
- 1
- 8
3
votes
2 answers
Specification of linear speed dampers
I'm looking at linear compression dampers and finding them most commonly specified only with a "Max Force" – e.g., 270 lbs.
However, since the damping mechanism is provided by hydraulic or pneumatic resistance, the damping force must be a function…
feetwet
- 1,757
- 2
- 16
- 44
2
votes
0 answers
What is meant by "accuracy within factor of 2" in sensors?
I've spent quite some time googling the meaning of "factor of (number)" in sensor accuracy but could not find any document explaining the meaning of this expression used to describe sensor accuracy. Specifically, I'm looking for the meaning of…
Jim
- 21
- 1
2
votes
0 answers
Moment Of Inertia Specifications AISC
Is there some regulatory body/inspection that verifies the AISC specified Moment(s) of Inertia for steel I-Beams? So for example, if a mill produces a W8x21 and says hey, it meets the specs, it's 8 in Deep and is 21 lbs/ft, and because I say so, it…
Andyz Smith
- 222
- 1
- 9
1
vote
1 answer
What specification describes best a bulldozer "strength"?
Bulldozers are tracked-type tractors designed to push soil and heavy objects. In a typical specification sheet, the following are listed:
Flywheel power (hp or kW)
Gross power (hp or kW)
Engine displacement (=volume)
Torque (I could not find this…
Triceratops
- 235
- 2
- 6
1
vote
0 answers
How to find building specs & blueprint(s) for an apartment complex?
For any given apartment complex in the U.S. (if you want to get specific, I am wondering about NYC), how does one track down the building's specifications. I'm talking about specs as detailed as the thickness of the walls (this is really the detail…
user110391
- 155
- 7
1
vote
0 answers
Are there any specifications that address the environmental conditions items traveling though international post should be able to tolerate?
In terms of temperature extremes, air pressure, humidity, shock, ... In determining what ranges to design for in a device are there any standards or at least guidelines either by postal services or governmental departments that can be used to gauge…
norlesh
- 275
- 2
- 10
1
vote
1 answer
buying a mounted bearing determining radial vs axial load it can bear
Can anyone tell if these bearings load ratings are for a radial load or an axial load ?
Bearing designed for an axial load is (sometimes?) called a "thrust bearing".
Based on its mounting, I guess this is a thrust bearing for an axial…
kinidkinid
- 11
- 2
1
vote
0 answers
How to specify plumbing fixtures so models are not immediately out of date
Rock-solid guide specifications are the ultimate pipe-dream of consulting engineers because they minimize the amount of time that needs to be repeatedly spent on the minutiae of tiny details from project to project.
In specifications for items that…
Secundus
- 571
- 1
- 4
- 20
1
vote
0 answers
External Static Pressure on Open Gallery Fan
I routinely work on building designs that incorporate rooftop upblast fans over large industrial spaces such as this one:
When selecting these fans, as with every other fan, you need to determine the external static pressure that the fan will…
Secundus
- 571
- 1
- 4
- 20
1
vote
1 answer
Comparing 2 shock scenarios with different magnitudes and times
For example,
How does one compare 100 g's for 6 milliseconds to 45 g's for 11 milliseconds. These are two different shock scenarios with different magnitudes and times, so how can I compare them? If I have something that is shock rated at 100 g's…
Mike James Johnson
- 113
- 4
0
votes
0 answers
Selecting Spectrometer Slit Size
I am sourcing a new spectrometer for my optics lab and I am wondering how to determine the slit size. They offer 10um, 25um, and 50um slit sizes with decreasing resolution as we go larger. I want to go with the 10um slit to have the highest…
0
votes
2 answers
Flywheel power vs. Gross power in bulldozers
In product specifications of bulldozers, the manufacturers give several figures for the engine power, such as flywheel power, net power - Net SAE J1349/ISO 9249, ISO 14396 power, and Gross SAE J1995 power.
What is the difference between them? Which…
Triceratops
- 235
- 2
- 6