The question is similar to this one asked 5 years ago. But the provided answer won't solve my issue.
Problem: irw won't show anything although prior configuratin via irrecord was successful.
Setup
- Raspberry Pi 2 Model B
- Buster 10.6 raspberrypi 5.4.72-v7+
- lircd 0.10.1
- Receiver GPIO 17
Configuration
/boot/config
dtoverlay=gpio-ir,gpio_pin=17
/etc/lirc/lirc_options.conf
[lircd]
nodaemon = False
driver = default
device = /dev/lirc0
output = /var/run/lirc/lircd
pidfile = /var/run/lirc/lircd.pid
plugindir = /usr/lib/arm-linux-gnueabihf/lirc/plugins
permission = 666
allow-simulate = No
repeat-max = 600
[lircmd]
uinput = False
nodaemon = False
/etc/lirc/lircd.conf
include "lircd.conf.d/*.conf"
/etc/lirc/lircd.conf.d/elegoo.lircd.conf
This file was created with irrecord: sudo irrecord -n -d /dev/lirc0 ~/lircd.conf
begin remote
name elegoo
driver devinput
bits 56
eps 30
aeps 100
one 0 0
zero 0 0
pre_data_bits 8
pre_data 0x23
gap 99861
toggle_bit_mask 0x0
frequency 38000
begin codes
KEY_POWER 0x49010000001181
# ...
KEY_9 0x44010000001187
end codes
end remote
Testing
sudo mode2 --driver default --device /dev/lirc0
Using driver default on device /dev/lirc0
Trying device: /dev/lirc0
Using device: /dev/lirc0
Running as regular user pi
pulse 9053
space 4459
...
space 2212
pulse 607
timeout 125069
Logging
Starting the service with sudo systemctl start lircd
Info: lircd: Opening log, level: Info
Notice: Version: lircd 0.10.1
Notice: System info: Linux raspberrypi 5.4.72-v7+ #1356 SMP Thu Oct 22 13:56:54 BST 2020 armv7l GNU/Linux
Info: Initial device: /dev/lirc0
Info: [lirc] protocol is enabled
Info: Initial device: /dev/lirc0
Info: [lirc] protocol is enabled
Notice: Options: driver: default
Notice: Options: output: /var/run/lirc/lircd
Notice: Options: nodaemon: 1
Notice: Options: plugindir: /usr/lib/arm-linux-gnueabihf/lirc/plugins
Notice: Options: logfile: syslog
Notice: Options: immediate-init: 0
Notice: Options: permission: 666
Notice: Options: driver-options:
Notice: Options: pidfile: /var/run/lirc/lircd.pid
Notice: Options: listen: 0
Notice: Options: connect: (null)
Notice: Options: userelease: 0
Notice: Options: effective_user: (null)
Notice: Options: release_suffix: _EVUP
Notice: Options: allow_simulate: 0
Notice: Options: repeat_max: 600
Notice: Options: configfile: /etc/lirc/lircd.conf
Notice: Options: dynamic_codes: (null)
Notice: Current driver: default
Notice: Driver API version: 3
Notice: Driver version: 0.10.0
Notice: Driver info: See file:///usr/share/doc/lirc/plugindocs/default.html
Info: lircd: Opening log, level: Info
Warning: Running as root
Info: Using remote: elegoo.
Notice: lircd(default) ready, using /var/run/lirc/lircd
Starting irw:
Notice: accepted new client on /var/run/lirc/lircd
Info: [lirc] protocol is enabled
As you can see I get no warnings or whatsoever. It must be something simple. Please can anybody advice?
