I have a question. I'm trying to increase the disk partition to more than 50G, which I recall was the default given by CentOS7 during installation. I'm wondering how to go about doing so, since I have this as a raid0 setup. And I obviously don't want to wipe and re-install everything.
Below is the lsblk output of this workstation, I'm interested in increasing /dev/md126p4 to perhaps 100G (or greater) to ensure plenty of space is left for future application installations. Thanks!
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 10.9T 0 disk
├─sda1 8:1 0 2T 0 part
└─md0 9:0 0 10.9T 0 raid1 /mnt/data
sdb 8:16 0 10.9T 0 disk
└─md0 9:0 0 10.9T 0 raid1 /mnt/data
sdc 8:32 0 10.9T 0 disk
└─md1 9:1 0 10.9T 0 raid1 /mnt/data1
sdd 8:48 0 10.9T 0 disk
└─md1 9:1 0 10.9T 0 raid1 /mnt/data1
sde 8:64 0 465.8G 0 disk
└─md126 9:126 0 1.8T 0 raid0
├─md126p1 259:0 0 200M 0 md /boot/efi
├─md126p2 259:1 0 1G 0 md /boot
├─md126p3 259:2 0 4G 0 md [SWAP]
├─md126p4 259:3 0 50G 0 md /
└─md126p5 259:4 0 1.8T 0 md /home
sdf 8:80 0 465.8G 0 disk
└─md126 9:126 0 1.8T 0 raid0
├─md126p1 259:0 0 200M 0 md /boot/efi
├─md126p2 259:1 0 1G 0 md /boot
├─md126p3 259:2 0 4G 0 md [SWAP]
├─md126p4 259:3 0 50G 0 md /
└─md126p5 259:4 0 1.8T 0 md /home
sdg 8:96 0 465.8G 0 disk
└─md126 9:126 0 1.8T 0 raid0
├─md126p1 259:0 0 200M 0 md /boot/efi
├─md126p2 259:1 0 1G 0 md /boot
├─md126p3 259:2 0 4G 0 md [SWAP]
├─md126p4 259:3 0 50G 0 md /
└─md126p5 259:4 0 1.8T 0 md /home
sdh 8:112 0 465.8G 0 disk
└─md126 9:126 0 1.8T 0 raid0
├─md126p1 259:0 0 200M 0 md /boot/efi
├─md126p2 259:1 0 1G 0 md /boot
├─md126p3 259:2 0 4G 0 md [SWAP]
├─md126p4 259:3 0 50G 0 md /
└─md126p5 259:4 0 1.8T 0 md /home
sr0 11:0 1 1024M 0 rom
