9

I have a HP server that has ILO port. How can i configure it to use from remote location? server os is debian-squeez.

ewwhite
  • 201,205
hd01
  • 279

6 Answers6

10

You can configure the ILO from the running operating system using the HP Online Configuration (hponcfg) utility.

Download the HP packages for your OS as detailed here. You may as well use this as an opportunity to install all of the agents for your server.

However, the main package you need is the hponcfg utility.

apt-get install hponcfg

Here's a description of the command usage. 

# hponcfg -h

Firmware Revision = 1.94 Device type = iLO Driver name = hpilo
HPONCFG RILOE II/iLO setup and configuration utility
Version 3.1.0 (c) Hewlett-Packard Company, 2010


-h,  --help           Display this message
-?                    Display this message
-r,  --reset          Reset the RILOE II/iLO to factory default
-f,  --file           Get/Set RILOE II/iLO configuration from "filename" 
-i,  --input          Get/Set RILOE II/iLO configuration from the XML input
                      received through the standard input stream.
-w,  --writeconfig    Write the RILOE II/iLO configuration to "filename" 
-a,  --all            Capture complete iLO configuration to the file.
                      This should be used along with '-w' option
-l,  --log            Log replies to "filename" 
-v,  --xmlverbose     Display all the responses from RILOE II/iLO
-s,  --substitute     Substitute variables present in input config file
                      with values specified in "namevaluepairs" 
-g,  --get_hostinfo   Get the Host information
-m,  --minfwlevel     Minimum firmware level

Using this tool, you will be able to supply an XML file as input containing some basic parameters for the ILO, like username, password, IP configuration, etc.

What may be easier in this case would be obtaining the ILO's current config using hponcfg -w ILO.xml, modifying the file to contain the IP and configuration you wish, then reconfiguring the ILO with the altered file with hponcfg -f ILO.xml.

Of course, if you have remote hands or someone with physical access to the server, this manual process works as well.

ewwhite
  • 201,205
3
  • Note the administrator password from the service tag.
  • Press F8 on server boot

You then get the iLO setup screen where you can set the IP/NM/DG and add a new user/password (do this, don't change the administrator password, not just yet anyway).

They you can just cable up the port and browse to the web interface - it's as simple as that.

Chopper3
  • 101,808
1

If you have installed using HP SmartStart then you may have the "HP Lights-Out Online Configuration Utility" installed to the following location:

[Program Files]\HP\hponcfg\hponcfg_gui.exe

If not, then you may be able to download it from here:

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=1135772&prodTypeId=18964&prodSeriesId=1146658&swLang=8&taskId=135&swEnvOID=1005

Nobody
  • 15,510
0

Found a link, thought of sharing.

How to Configure iLO on your HP Proliant Server

May be it helps all.

Rahul
  • 1
0

If the server is running WIndows OS, then we can use HP Lights-Out Online Configuration Utility (HPONCFG.exe utility) for Windows. This is a simple GUI and we can easily reset the password. This utility does not ask for any password when you launch it. Moreover, when you reset the iLO password, HPONCFG will not ask for the previous password.

If we use this method, then we do not have to turn OFF the server and use the System Maintenance switch (iLO Security Override Switch) available on the Server system board.

For more information, may be the link provided below will be worth to look,

How to reset iLO Administrator password of HP Server

http://www.tricksguide.com/reset-ilo-forgot-administrator-password-of-hp-proliant-server.html

Cheers

Sirajul Haque
  • 1
0

The manual process that ewwhite linked to in his post can be found (salvaged) here http://hp-ilo.blogspot.com/#!

Gargoyle
  • 1