85

I have NGINX and php5-fpm. Several times per hour my website stucks and in logfile I see the following:

WARNING: [pool www] server reached pm.max_children setting (5), consider raising it.

The /etc/php5/fpm/pool.d/www.conf file contains the following configuration:

pm = dynamic
pm.max_children = 5
pm.start_servers = 2
pm.min_spare_servers = 1
pm.max_spare_servers = 3

Server: AMD Opteron™ 3280, Octo-Core, 8x 2.4 GHz, 16 GB DIMM (DDR3).

What numbers should I put in www.conf file for this server?

Nikita Kipriyanov
  • 15,624
user1821484
  • 1,249

3 Answers3

73

There are many possible reasons why your PHP-FPM would reach the max_children. Most common ones are:

  • A lot of parallel requests from your clients
  • Slow execution of the PHP scripts
  • Very low setting of the max_children

Looking at the specs of your machine, assuming there is nothing else than PHP+Nginx running, I think you could set it much higher than 5. You say you have 8 Cores, usually Nginx needs much less CPU than PHP, so with 5 children you will probably never be able to use all of them. I'm usually setting it to something like the number of cores x 2 or number of cores x 4, depending on the memory consumption of your PHP scripts.

Eje
  • 131
replay
  • 3,310
40

I found that by setting the pm.max_requests value (which is commented out by default) helped in fixing these errors. This setting forces child requests to respawn after executing a certain number of requests and can be helpful if there are memory leaks somewhere in your code or 3rd party libs.

In /etc/php-fpm.d/www.conf:

pm.max_requests = 500
t j
  • 503
3

I had the same problem whith my docker php-fpm and I fixed it by modifing parameters in these files: /usr/local/etc/php-fpm.d/www.conf /usr/local/etc/php-fpm.d/www.conf.default

The new parameters are :

pm = dynamic
pm.max_children = 25
pm.start_servers = 10
pm.min_spare_servers = 5
pm.max_spare_servers = 20
pm.max_requests = 500

Ecocdk
  • 31