0

I have a RAID 1 system for my IBM x3550 m4 that had suddenly failed. (system board problem). While waiting for the technical support from IBM, I really need to get the data from that server so I can transfer it to a temporary server. Since RAID 1 is a duplicate of 2 HDD, my question is, is it possible to move that 1 Hard drive from the failed server and insert it to a same IBM x3550 m4 just to get/backup the data that I needed? (without losing any data from both)

MadHatter
  • 81,580
Faye
  • 19

2 Answers2

1

If your temporary server is the same hardware, with the same RAID card, then check with your support if you can simply replace the disks in the new machine.

If not, I would definitely wait for IBM to replace the failed system board.

Law29
  • 3,617
  • 1
  • 18
  • 30
1

Generally, this is possible, but I have no experience with that particular RAID controller. Normally, the meta data is stored on the drive, so inserting it in another server should work. You can immediately accompany it with an empty disk, and it may even sync it for you.

I would ask IBM support, though.

Also remember that your network MAC address will change, and this may affect DHCP leases, interfaces names (linux udev), etc.

Halfgaar
  • 8,534