Using Debian 8.7
I have VPS server with allocated ipv6 range:
2a01:xxxx:xxxx:xxxx::2/64
ifconfig looks like this
Link encap:Ethernet HWaddr 52:54:a2:01:9a:8c
inet addr:172.31.1.100 Bcast:172.31.1.255 Mask:255.255.255.0
inet6 addr: 2a01:xxxx:xxxx:xxxx::2/64 Scope:Global
inet6 addr: fe80::5054:a2ff:fe01:9a8c/64 Scope:Link
I can ping the server using primary IPv6 2a01:xxxx:xxxx:xxxx::2/64
ping6 2a01:xxxx:xxxx:xxxx::2
PING 2a01:xxxx:xxxx:xxxx::2(2a01:xxxx:xxxx:xxxx::2) 56 data bytes
64 bytes from 2a01:xxxx:xxxx:xxxx::2: icmp_seq=1 ttl=59 time=1.20 ms
64 bytes from 2a01:xxxx:xxxx:xxxx::2: icmp_seq=2 ttl=59 time=0.466 ms
However, when I try to use other IPs assigned I get no response.
e.g.
ping6 2a01:xxxx:xxxx:xxxx::3
ping6 2a01:xxxx:xxxx:xxxx::4
ping6 2a01:xxxx:xxxx:xxxx::5
ping6 2a01:xxxx:xxxx:xxxx::6
This is not limited to ping but also to any other request.
I would like to serve apache from multiple IPv6 addresses (not whole range).
Where/ how should I change configuration to listen on more than 1 IPv6 address?
Both HTTP and ping should work (Ping is used for uptime checks for specific services).
