Server Fault
Server Fault

Questions tagged [dante]

The Dante SOCKS proxy server. (Not to be confused with the Dante AV audio-over-IP protocol.)

The Dante SOCKS proxy server. (Not to be confused with the Dante AV audio-over-IP protocol.)

53 questions
10
votes
1 answer

Dante (SOCKS server) not working

I'm trying to set up a SOCKS proxy using dante for testing purposes. However, I can't even get it to work with a web browser, after looking at several tutorials on how to do that. I've tried in both IE and Firefox, in both cases, using "Manual proxy…
gregmac
  • 1,689
5
votes
0 answers

Dante unable to bind to public ip address

I have a Dante server on a host with multiple public ip addresses but it is unable to bind to the ips of the host. The ips are pingable, I have another service listening on each of them (different port) which works so I know the ips work. On my test…
Romeo Mihalcea
  • 542
4
votes
0 answers

Dante Socks Multiple instances

I have correctly installed Dante on Ubuntu server as a proxy, and it works, but I must have e multiple instances of it (each of them has to works in different port). I have tried it in this way: tomas@server: $ sudo cp /etc/sockd.conf…
CuriousPanda
  • 43
4
votes
2 answers

Dante sockd can't forward traffic through multiple virtual IPs

I have configured Dante sockd to forward traffic through multiple IP interfaces. The config is basically this: logoutput: /var/log/sockd.log debug: 1 socksmethod: username none internal: eth0 port = 60000 external: eth0 internal: eth0:0 port =…
Simon Greenwood
  • 1,403
4
votes
0 answers

Ubuntu SOCKS proxy setup with two interfaces - how to pass DNS

I setup a SOCKSv5 server (Dante) on Ubuntu with two ethernet interfaces: eth0 is connected to my WAN with a static routable IP eth1 is connected to my LAN with a private IP I have a client connected on the LAN, and I'm able to ping the LAN port…
Ravi
  • 163
4
votes
1 answer

Use authentication with Dante Socks

I just set up my dante socks proxy and it works just fine without authentication. Now I want only certain users to be able to use it tho. Preferably only those users that are in the passwd. What would you guys recommend me using? Can I somehow use…
cherrun
  • 759
3
votes
1 answer

SOCKS Proxy over DNS

I'm trying to implement something similar to the service provided by https://www.smartdnsproxy.com, where clients only need to change their DNS settings to connect to a HTTP/S or SOCKS5 proxy. I think I understand the individual components, but I'm…
Oscar Wahltinez
  • 95
3
votes
4 answers

dante not starting during server reboot

I installed dante (v1.4.2) using apt-get install dante-server on ubuntu 18.04 and have following configuration: /etc/danted.conf logoutput: /var/log/sockd.log internal: eno1 port = 1080 external: eno1 external.rotation: same-same socksmethod:…
Deepika
  • 57
3
votes
1 answer

Danted Socks Proxy with Authentication

I've been trying to set up a SOCKS proxy on linux with danted. I have the proxy working perfectly without authentication, but when I try adding in authentication with both method: username and method: pam I can't log in with any of the usernames or…
Ed R
  • 61
3
votes
0 answers

How do i configure a simple dante instance?

I'm trying to set up a simple SOCKS proxy on Amazon EC2, but I'm not able to figure out the documentation and configuration file for dante. For now i've been able to set up a proxy without authentication (which i took offline immediately after…
Maciej Swic
  • 291
3
votes
1 answer

Dante SOCKS server with two external interfaces (e.g. Wired Ethernet and Wi-Fi)

I want Dante to transparently choose between either of the two interfaces enp4s0 (Wired Ethernet) and wlp3s0 (Wi-Fi) regardless of their status (up or down). That is when wired, it should choose enp4s0 indeed, when wlp3s0 is added, it should…
Alexander Shukaev
  • 131
2
votes
2 answers

Dante 1.4.x sockd not working for localhost

I am trying to run a SOCKS server which listens for SOCKS connections on localhost. There will actually be SSH tunnels reaching this server if you are wondering about the purpose. I based the configuration off the suggestions in the documentation…
John Tate
  • 229
2
votes
1 answer

Dante server custom authentication

Is there any way in Dante that I can create my own authentication script? Take this squid configuration for example: auth_param basic program /usr/bin/python /etc/auth.py
Romeo Mihalcea
  • 542
2
votes
0 answers

Dante with Kerberos configuration across sites

I have a requirement to host a socks proxy in a central location, using Dante. What I've been asked to do is connect remote clients to it across the internet, they'll pass through a gateway routing device that will forward HTTP traffic to Dante, in…
Stephen K.
  • 21
2
votes
2 answers

Dante blocking some localhost connections

I connect through a tunnel to Dante. It works but still blocks two of the apps that I need to work through the SOCKS proxy Aug 28 14:20:24 (1377699624) danted[3519]: block(1): tcp/connect [: 127.0.0.1.51519 -> 127.0.0.1.30000 Aug 28 14:20:33…
Chroma Funk
  • 43
1
2 3 4