Engineering Stack Exchange
Engineering Stack Exchange

Questions tagged [cnc]

Computer Numeric Control (CNC) is the automation of machine tools that are operated by precisely programmed commands encoded on a storage medium (computer command module, usually located on the device) as opposed to controlled manually by hand wheels or levers, or mechanically automated by cams alone. Most NC today is computer (or computerized) numerical control (CNC), in which computers play an integral part of the control.

Computer Numeric Control (CNC) is the automation of machine tools that are operated by precisely programmed commands encoded on a storage medium (computer command module, usually located on the device) as opposed to controlled manually by hand wheels or levers, or mechanically automated by cams alone. Most NC today is computer (or computerized) numerical control (CNC), in which computers play an integral part of the control.

88 questions
4
votes
2 answers

How do I manufacture a fillet?

What are the most popular and the most efficient ways to machine a fillet on an external edge of an object? If I were to use a CNC mill, what tools can I use for it, and how would the method change with the radius of the fillet? I could imagine that…
Slovakov
  • 171
  • 1
  • 1
  • 7
4
votes
1 answer

Accounting for blank registration within CAD design

How do CAD designers account for the fact that a blank may have to be flipped to a different side in order to allow the piece to be completely milled through a CNC system? For an example, let's use this car made from a rectangular block of pine: It…
user16
4
votes
2 answers

High spindle speed, low tool pressure

I'm building a small hobby CNC machine out of aluminium with the end goal of milling plastic, aluminium and possibly some harder stuff like steel (although if you saw the machine you'd laugh me out of the room). The machine isn't as rigid as I…
Bojangles
  • 141
  • 3
3
votes
3 answers

CNC milling of large cutouts

I have a part made from 5mm alloy plate and I need to cut a large cutout in the middle of said part: As seen above I intend to use a small cutter to cut through the stock (not necessarily plunging as shown here) and cut around the inner diameter of…
HJCee
  • 113
  • 1
  • 8
2
votes
0 answers

Standard parameters for machining aluminium?

Sorry for the weird question but I was wondering about the standard machining parameters for Aluminium (if there is even a standard). Particularly the values for a CNC process (preferably in SI) for a rough volume milling and one for a finishing…
Trung Nguyen
  • 21
  • 1
2
votes
1 answer

Is conversion from EMC (*.ngc) to heidenhain (*.h) CNC code possible?

I have some gcode created with dmap2gcode. This and Meshcam are the only software I could find that could would take a large image and create the necessary gcode. Now I would like to try cutting this on a different machine. This machine however is…
Jesse RJ
  • 21
  • 1
2
votes
1 answer

Asymmetrical collet nut snaps end mills

Could you clarify my suspicions. My spindle (HY HUANYANG, model: GDZ-80-2.2A) has come with a collet nut which has bizarre asymmetrical form of the supporting ring inside it (the ring for collet groove). Since I have obscure issue why all my end…
Vitalii Sadovshikov
  • 121
  • 1
2
votes
1 answer

Actual Chip Thickness Calculation for CNC Machine Endmills

Have a look at this image: this image is from: https://www.guhring.com/Tech/endmillcalc I would like to know how the formula for the "Actual Chip Thickness" is done In this case, it is 0.104 Using speeds and feeds for this…
DarkPh03n1X
  • 141
  • 3
2
votes
0 answers

Did I buy the wrong SBR rails? They don't seem to attach or align

I have bought some SBR12 rails and bearing blocks in an attempt to make a fancy flatenning jig for my router. I haven't been able to see 100% everything that other people have done on the YouTubes due to camera angles etc, but I went ahead and…
physicsboy
  • 121
  • 1
2
votes
0 answers

Is it possible to have a reference pulse interpolator for a CNC machine with dc drive?

Is it possible to have a reference pulse interpolator for a CNC machine with a dc drive? it should work with alternating current drive but I am not sure about the direct current drive. please help me getting its answer. thanks
Satya
  • 422
  • 3
  • 12
2
votes
2 answers

Professional threaded insert in plastic?

I'm getting some plastic parts (made with HDPE) CNC machined. A few of these parts require the addition of threaded inserts. I've printed the parts myself using a 3d printer and when I add the threaded insert, it's impossible to insert it perfectly…
Jason Easton
  • 21
  • 1
2
votes
0 answers

What is an "Optical Axis Rod"?

I'm in the process of designing a CNC/3d printer and I came across the term "Optical Axis rod" which seems to be the "standard" rod printers like Prusa use. But I can't find anywhere what the difference between just a "machined rod" and "Optical…
Beacon of Wierd
  • 159
  • 7
2
votes
2 answers

Why are entry-level CNC mills cheaper than entry-level manual mini mills?

Having used some big, old, manual Bridgeports in school, I was looking into getting a small mill (manual or CNC) for hobbyist home use on metal and wood. I was surprised to see many CNC milling kits on Amazon for quite cheap ($200-600 USD) whereas…
rfii
  • 123
  • 4
2
votes
5 answers

Low cost molds. Can such molds be produced?

I recently found the following link https://anglingai.com/224b-4-4-blood-line-swim-bait-mold/. There you will see that they sale hundreds of different aluminum molds related to fishing. These molds are really inexpensive (from 50 up to 200 USD). How…
Efthymios Kalyviotis
  • 201
  • 1
  • 7
2
votes
1 answer

Solidworks hole table export data format

I'm trying to help a student with a project. The task is to generate CNC G-Code from a Solidworks hole table export (CSV) using VBA. The problem is the export format is going to be a difficult to parse. Samples include the following: TAG,X LOC,Y…
Transistor
  • 12,108
  • 2
  • 22
  • 32
1
2 3 4 5 6