3

Initially my USB2.0 ports were working during POST (and boot). However, now they appear not to be. I first noticed this when I could not access the RBSU by pressing F9 during POST. Then found that I couldn't boot from USB either (I was able to do both of these initially). When performing the boot via iLo remote console I can access all of the setups (i.e., all of the F(X)'s) and can boot virtual media from a 'removable drive'. Keyboard works fine once the OS is booted.

Not really sure what to try here.

Any advice would be greatly appreciated.

Thanks.

Nick.

user3513346
  • 87

1 Answers1

3

Can you give us more information on what you're trying to do?

  • On your keyboard, does the caps-lock key work?
  • Are you using a KVM switch at all, because weird things can happen?

Also see: Is there a better workaround or solution to boot a Proliant DL380 Gen8 from USB DVD drive than "Restore Default System Settings"?

Please use your ILO to check the RBSU and navigate to the USB port settings in the BIOS.

  • Make sure the external ports are not disabled.
  • Check your drive boot ordering settings.
  • Upgrade your system firmware through Intelligent Provisioning (F10).
  • If all else fails, reset the BIOS settings to default.

enter image description here

enter image description here

Community
  • 1
ewwhite
  • 201,205