Questions tagged [coil-spring]
15 questions
2
votes
3 answers
How are springs that are designed for 100% extension different for ones that are designed for 60% extension?
Some trampoline springs extend only 40-50% before reaching their elastic limit. (e.g. a 10 inch spring can extend to 14 or 15 inches. Good springs can extend to 100% (E.g. a 10 inch spring can extend to 20 inches.
What is the difference?
Is this…
Sherwood Botsford
- 556
- 2
- 9
1
vote
3 answers
What are effective anti-corrosion coatings for high carbon steel springs?
In trampoline design, the most common springs have a total elongation of about 60% of rest lengh. E.g. a 10" spring can be stretched to 16" indefinitely without deformation. These springs are usually zinc plated, chrome plated. But rust is a…
Sherwood Botsford
- 556
- 2
- 9
1
vote
1 answer
How to build an Adjustable Tension Spring?
Is there such a thing as an off-the-shelf adjustable tension spring? I've searched extensively without success.
The problem I'm trying to solve is as follows:
I have a tension spring hanging from a fixed point and I want to:
Achieve the same…
Milo
- 11
- 2
1
vote
0 answers
How to calculate how much compression is needed for a spring to buckle
First off; School was many years ago and I know little of the mathematics behind all the physics and engineering stuff. So if you have an answer, please explain it like I'm 5?
The goal: I aim to be able to create a buckling spring switch (like the…
qwelyt
- 111
- 2
1
vote
1 answer
What's the name of a device to simulate an object jumping in the air?
I want to make a film of a puppet jumping in the air into the water of a lagoon. I am looking for a pad with a spring release timer that I can bury in the sand so it's out of sight from the camera, wait 10 seconds for example, and the spring or coil…
ginjaemocoes
- 161
- 1
- 10
1
vote
1 answer
Are recoil operated crossbows/ballistae feasible?
This question is specifically about stationary or vehicle mounted crossbows, not man-portable ones
The projectile size would measure about 1.8 - 2 meters in length, so the crossbow would have corresponding proportions
The materials would be wood…
JED
- 13
- 2
1
vote
1 answer
Help with linear rod drill press like design/materials
I am putting together a basic machine for “pad printing” extremely small and precise parts. The design is very much the same as most homemade drill presses and consists of linear rods, flanged bearings and compression springs, but in place of a…
Jalapeno Jack
- 113
- 5
1
vote
1 answer
Overextending and cutting a coil spring
This is related to my recent question
Can I weaken a coil spring consisting of spring steel?. The answer here could create an additional answer there, but I do not expect that. The difference to that question is that this is about changes in the…
Volker Siegel
- 200
- 2
- 8
0
votes
1 answer
What does squared end spring mean?
What does squared end spring mean?
In most cases I have seen shown closed and squared springs where the last coil touches the previous one.
But it seems that squared end means that the end is flat, but the end doesn't need to be closed. Is this…
user5507535
- 127
- 4
0
votes
1 answer
What happens while skewing a spring?
I'm trying to design this magazine spring in CAD:
But this spring should be skewed:
When designing the spring, there's one problem, one "leg" would need to be longer than the other for the coils to join:
Even if the metal could expand and…
user5507535
- 127
- 4
0
votes
1 answer
How is energy in the hairspring restored in a mechanical watch?
I've read through the excellent guide to how mechanical watches work by Ciechanowski, but it leaves some questions unanswered.
The main spring of the watch, when it loses energy, can of course be re-wound using the watch's crown, and the guide above…
Eugene Osovetsky
- 103
- 4
0
votes
2 answers
What causes damage to my drone when falling down?
I am trying to design a landing gear system and I am stuck at whether I should use a spring as a kind of shock absorber in my landing gear. Currently, the scope of my project is only concerning about "hard landing"--which is just about the drone…
Faito Dayo
- 153
- 1
- 6
0
votes
2 answers
Sizing a spring
I am attempting to 3D print my own Quad lock mount and require a spring. I've taken some measurements but don't know how to search for where I can buy more springs. Dimensions:
12mm height, 20mm OD. Thanks
flying_loaf_3
- 115
- 2
0
votes
1 answer
Looking for a compression spring alternative with 10x lifespan
I'm working on a project where 100k spring cycles is gonna last a few months
Any recommendations on an alternative? I considered magnets but their sprigabilty isn't great (also, will they get demagnetize with constant repel forces?)
I'm working on a…
Simon
- 115
- 1
- 10
-1
votes
2 answers
How can I find stiffness of a steel coil spring used in dump trucks?
How can I find stiffness of a steel coil spring used in dump trucks?
Here is the data of the question.
Length of spring unloaded = 220mm
Outer Diameter = 27mm
Inner Diameter = 15mm
Wire Diameter = 6mm
Material is steel, G= 77.2 GPa
Spring must bear…
Ibrahim Omer
- 57
- 1
- 2
- 8